Made in the US using superior standards. Dont lose or damage your dinghy by installing tow rings that wear and break away!

• Can be used on any hypalon inflatable boat
  • Specially designed for AB, Caribe, Apex, Avon, Novurania and Nautica inflatables.
• 2.5 wide stainless steel d-ring with triangular Hypalon pad.
• Hypalon Apron is 10 wide on the bottom of the triangle and 8.5 inches tall.
• They have a Hypalon apron, a polypropylene strap, and a stainless steel D-ring.
• The secondary bottom pad is made of raft floor material and is pre-sanded for a superior bond.

D Ring installation instructions:

• Decide where youre going to place the d ring then trace around D ring with a pencil.
• Apply masking tape or painting tape around the traced area.
• Sand the boat as well as the d ring lightly and clean the area well using Toluene (Hypalon boats) or MEK (PVC Boats)
• Apply 3 applications of glue (2 on boat, one on d ring) allowing each application to become tacky (roughly 15 minutes).
• Stick the d ring down to boat and roll out the bubbles with a roller rasp.
• Allow to dry for 24 hours.