Small PVC D-rings for inflatable boats

• Inflatable Boat Stainless Steel D-Ring with vinyl (PVC) apron in white, light gray black, medium gray or red.
• Available in white, light gray, medium gray, black or red.
• Dimensions:
  • Small (110)- 4 Diameter, 1.5 D-ring
  • Medium (120)- 6.5 Diameter, 2.5 D-ring
• Double pad assembly. Bottom pad is made of extra thick floor material. The UV proof polypropylene webbing are computer sewn, cross stitched AND glued to the bottom pad; the vinyl apron is glued over the D-ring and bottom pad assembly.
• Our d-rings serve many purposes including bimini and general purpose attachment points.
• For towing and davit lifting ring applications, we recommend the larger D-Ring.
• PVC glues, solvents and roller rasps listed in related products below.
• Proudly made in the US using high grade, non rusting stainless.

D Ring installation instructions:

• Decide where youre going to place the d ring then trace around D ring with a pencil.
• Apply masking tape or painting tape around the traced area.
• Prep both surfaces using MEK. See related products below.
• Apply 3 applications of glue (2 on boat, one on d ring) allowing each application to become tacky (roughly 15 minutes).
• Stick the d ring down to boat and roll out the bubbles with a roller rasp.
• Allow to dry for 24 hours.